Bullhead bodied Deuce and a Third

This hare brained contraption was called into existence almost two years ago, and has been on-again/off-again like everything else I’ve started. With that being said, please don’t expect completion or closure.
The intent was to build something that was pieced together out of surplus Deuce and a Half parts. Here is the beginning of the end, with a dremel (haggard)cut frame out 3/4″ square tube steel, RC4WD transmission, and an unknown turn 12V drill 550 motor :
ec9a64f008d1cac141f67b90add08468 Bullhead bodied Deuce and a Third
Convenient use of a TX as a ride height gauge:
ca09bc9628b457d4ce68c95e215d34b6 Bullhead bodied Deuce and a Third
This project was originally going to use a Pro Line 1956 Ford truck body, so the wheel base was set off of it:
7e1251ac5f53fc63760de675405bbecb Bullhead bodied Deuce and a Third
0970e31d4b25ffe6bad791bd679e6a5b Bullhead bodied Deuce and a Third
33f6e1b40dca26b9001279cb97445a60 Bullhead bodied Deuce and a Third
Once that was figured out, leaf springs made from stainless steel radiator hose clamps:
f5b26a779725e2955e43bf8571cf7570 Bullhead bodied Deuce and a Third
bc0c2082943fa4f686bd93891bf58c84 Bullhead bodied Deuce and a Third
Magnets holding the crudely fabricated shackles in place:
e1f7b7b726e9874d3b8c4e77501ad2a5 Bullhead bodied Deuce and a Third
6ac928d0531dac50f7543aa5a6009787 Bullhead bodied Deuce and a Third
And that was as far I made it since I was building this while at a six week school. Boxed up and sent home until it was time to revisit it.

Sent from my HTC Desire 626 using Tapatalk

Leave a Reply