TLR 22 4.0 2WD buggy

22 4.0 640x393 TLR 22 4.0 2WD buggy

Team Losi Racing have introduced the new 22 4.0 2WD buggy. The 22 4.0 builds on the engineering of the 22 3.0 buggy by giving racers the ability to adapt the transmission and suspension configurations to any track. The 22 4.0 is based on features such as the adjustable rear shock location which can be flipped for a forward or rearward bias. This means the GenII rear shocks can be mounted in front of the rear tower and suspension arm, or in the traditional location on the back of the arm. This is a popular tuning option for high-grip surfaces that increases forward weight bias, rear end stability, and landing ability. To maximize performance for any surface, two transmission options that are included. The stand-up option from the 22 3.0 kit provides the best balance for low-to-medium grip surfaces. The laydown option moves the motor about 20mm closer to the center of the chassis. Differential height can be adjusted for soil and artificial surfaces.

Buy it Now TLR 22 4.0 2WD buggy

See: Team Losi Racing

Also new is the aluminum-plate rear hub. The molded-composite hub base allows a bearing to be press fit without play and minimal unspring weight. An aluminum plate is secured to the hub with an M3 screw and ball stud which is vertically adjustable. Now the ball stud is supported by aluminum from pushing or pulling out, while still threading into composite so it won’t work loose. The higher glass content of Stiffezel molded composite is used in strategically placed suspension components for more consistent and stable driving. This includes the front and rear suspension arms, mud guards, stand up shock tower, and waterfall chassis braces. The result is a buggy that corners more consistently and lands with great improvement.

Optional brass ballast weighs can be mounted under the servo, under the electronics, and under the laydown transmission idler. This makes it easy to tune the static weight and weight bias for changing track conditions. When running a higher static weight, the chassis will become more neutral and easier to drive on ultra-high-grip surfaces. The 22 4.0 uses all of the revised components from the 22 2.0 ball differential, the 22 4.0 diff will deliver super-smooth, long-lasting performance. Features include flattened 2nd operation outdrives, revised thrust washers, tungsten carbide diff and thrust balls, a one piece nut, and a self-centering diff gear.

(adsbygoogle = window.adsbygoogle || []).push({});

The GenII Big Bore shocks continue to set the standard for high performance and easy maintenance. Features include X-Ring Seals, machined shock bushings, machined 2 x 1.6 and 2 x 1.7mm pistons, TiCN coated shock shafts, aluminum bleeder screw caps, hard-anodized threaded shock bodies, low-frequency springs, and spring cups that snap onto the shock shafts. The all-new lightweight 7075-T6 aluminum chassis has been revised to accommodate the battery mounting options for both transmission configurations. Milled pockets have been added that lighten the overall weight of the chassis. The pockets also function as mounting stations for the optional brass ballast weights (sold separately).

The 22 4.0 kit comes loaded with optional upgrades like a milled 7075 aluminum top shaft, motor plates, rear camber block, clamping rear hexes and ball stud spacers throughout. It also includes HRC and LRC front pivots, standard and +3 rear hubs, aluminum bleeder shock caps, machined shock pistons and internals. Finally, the 22 4.0 comes with the all-new, low-profile body designed to provide outstanding aerodynamic performance. Pulled from 0.7mm polycarbonate, it also has the perfect balance of light weight and durability for 2WD buggy racing.

VRC 468x90 TLR 22 4.0 2WD buggy

Leave a Reply