Categories
Racing RC Cars

GH Scaler Message Trailer – Part of the GHST Series

The newest addition to the Goodson’s Hobbies Scaler Trailer Series – the GH Message Trailer. I’ve included all the necessary components for printing here, however you can use the suspension interchangeably with the other GHST components if you want to use the 1.9 wheels, tires, fenders, etc.

Reference the build video on YouTube here for assembly instructions:
https://youtu.be/8HU2aZumxQQ

I hope you like printing the GH Message Trailer. I had fun making this design and am happy to provide it for free. If you routinely pay $4 for a coffee or $3 for an energy drink, I ask you to consider donating or tipping me for the hours I have spent working on designing and printing the GHST. Follow me here and on Instagram (@goodsons_hobbies) to keep up with my latest work. I’m open to feedback and ideas, comment or message me I usually respond within a day.

You will need to print the following:
1x MessageTrailer – Frame
1x SignMount (2x or 3x depending on number of LED signs being used)
1x SignRetainer (2x or 3x)
1x SolarStand
1x SolarPanel
1x Lid
2x LeafSpring
2x LeafMountInner
2x LeafMountOuter
1x Shackle L
1x Shackle R
2x TailLightLens
2x TailLightHousing
4x Leg (short or long)
1x Lock Pin (prints in quantity of 4)

Optional parts to print
1x BatteryBank (drops into storage compartment)
1x HitchBallReceiver
Scale printable wheels tires and axle:
2x 15WagonWheels
2x 15TireRoundLogo
1x NarrowAxle

Rotate everything to print flat. You will need support on a few items including the SignMount, Frame, and TailLightLens.

LED Name Tags/ Message Displays
Will require 2 or 3. They appear similarly sized from many vendors including eBay, Amazon, Banggood, and AliExpress. Roughly 92mm wide, 30mm tall, and 6mm deep on the outside edges.

Assembly hardware (change as you see fit or substitute glue):
12x M2x5 self tapping screws
4x M2x8 self tapping screws
6x M3x12
1x M3 set screw for hitch ball receiver
1x 1mm or about .040″ diameter wire, or substitute and drill for hinge

Find my GHST collection here: https://www.thingiverse.com/Goodsons_Hobbies/collections/ghst-goodsons-hobbies-scaler-trailer to finish off your build

I would love to see your makes, post here or tag me on instagram

find me on instagram @goodsons_hobbies

The newest addition to the Goodson’s Hobbies Scaler Trailer Series – the GH Message Trailer. I’ve included all the necessary components for printing here, however you can use the suspension interchangeably with the other GHST components if you want to use the 1.9 wheels, tires, fenders, etc.

Reference the build video on YouTube here for assembly instructions:
https://youtu.be/8HU2aZumxQQ

I hope you like printing the GH Message Trailer. I had fun making this design and am happy to provide it for free. If you routinely pay $4 for a coffee or $3 for an energy drink, I ask you to consider donating or tipping me for the hours I have spent working on designing and printing the GHST. Follow me here and on Instagram (@goodsons_hobbies) to keep up with my latest work. I’m open to feedback and ideas, comment or message me I usually respond within a day.

You will need to print the following:
1x MessageTrailer – Frame
1x SignMount (2x or 3x depending on number of LED signs being used)
1x SignRetainer (2x or 3x)
1x SolarStand
1x SolarPanel
1x Lid
2x LeafSpring
2x LeafMountInner
2x LeafMountOuter
1x Shackle L
1x Shackle R
2x TailLightLens
2x TailLightHousing
4x Leg (short or long)
1x Lock Pin (prints in quantity of 4)

Optional parts to print
1x BatteryBank (drops into storage compartment)
1x HitchBallReceiver
Scale printable wheels tires and axle:
2x 15WagonWheels
2x 15TireRoundLogo
1x NarrowAxle

Rotate everything to print flat. You will need support on a few items including the SignMount, Frame, and TailLightLens.

LED Name Tags/ Message Displays
Will require 2 or 3. They appear similarly sized from many vendors including eBay, Amazon, Banggood, and AliExpress. Roughly 92mm wide, 30mm tall, and 6mm deep on the outside edges.

Assembly hardware (change as you see fit or substitute glue):
12x M2x5 self tapping screws
4x M2x8 self tapping screws
6x M3x12
1x M3 set screw for hitch ball receiver
1x 1mm or about .040″ diameter wire, or substitute and drill for hinge

Find my GHST collection here: https://www.thingiverse.com/Goodsons_Hobbies/collections/ghst-goodsons-hobbies-scaler-trailer to finish off your build

I would love to see your makes, post here or tag me on instagram

find me on instagram @goodsons_hobbies

Leave a Reply

Your email address will not be published. Required fields are marked *